Beryllium Copper Alloy Foil Strips Qbe1.9Ti With Perfect Conductivity For Spring Connectors
Product Description:
Name: Beryllium Copper Alloy Foil Strips
Tape: Qbe1.9Ti
Specification: 0.8mmx200mm
Tolerance: +/-0.015mm
State: Soft, Hard, Ageing(Soft), Ageing(Hard)
Surface: Bright/Polished
Application: For spring connectors
Chemical Composition of Beryllium Copper Alloy Qbe1.9Ti:
| CUBERYLLIUM® Brand | Gost- Number | Be | Al | Ni | Fe | Cu | Si | Ti |
| Qbe1.9Ti | БрБНТ1.9 | 1.87-2.10 | 0.15 max | 0.2~0.5 | 0.15 max | Balance | 0.15 max | 0.1～0.25 |
Typical Physical Properties of Beryllium Copper Alloy Qbe1.9Ti:
Density (g/cm3): 8.25
Elastic Modulus(Gpa): 130
Electrical Conductivity: 22-28% IACS
Thermal Expansion Coefficient(m/m℃): 17.5x10-6
Thermal Conductivity(25℃): 105W/m℃
Melting Point (°C): 870
Mechanical And Electrical Properties of Beryllium Copper Strip Qbe1.9Ti:
| Name | Temper | Thickness
(mm) | Tensile Strength | Hardness | Elongation (min) |
| MPa | HV | Percent |
| Qbe1.9 | Soft | <0.15 | >390 | <120 | >30% |
| 0.15~0.25 | 390~590 |
| >0.25 | 390~590 |
| Hard | <0.15 | >590 | >160 | >3% |
| 0.15~0.25 | 590~880 |
| >0.25 | 640~930 |
After Ageing
(Soft) | <0.15 | >1080 | >330 | >2% |
| 0.15~0.25 | 1080~1470 |
| >0.25 | 1130~1470 |
After Ageing
(Hard) | <0.15 | >1080 | >360 | >1.5% |
| 0.15~0.25 | 1130~1570 |
| >0.25 | 1170~1570 |
Standard of Beryllium Copper Alloy Qbe1.9Ti:
| Shape | Standard Specification |
| Bar | ГОСТ15835-2013 ASTM B194, B196, |
| Plate | ГОСТ1789-2013;ASTM B194 |
| Rod | ГОСТ15835-2013 AMS 4650, ASTM B196, MILITARY MIL-C-21657, SAE J463, |
| Rod, Forging | ГОСТ15835-2013;AMS 4650 |
| Sheet | ГОСТ1789-2013 |
| Strip | ОСТ1789-2013; ASTM B194, SAE J463, J461 |
Standard Tolerance of Beryllium Copper Strip Qbe1.9Ti:
| Tolerance Sheet |
| (MM) |
Strip
Thickness | CuBeryllium®
Standard Tolerance |
| over | incl. | minus |
| 0.03 | 0.08 | 0.003 |
| 0.08 | 0.1 | 0.004 |
| 0.1 | 0.15 | 0.005 |
| 0.15 | 0.2 | 0.006 |
| 0.2 | 0.25 | 0.007 |
| 0.25 | 0.4 | 0.008 |
| 0.4 | 0.55 | 0.009 |
| 0.55 | 0.7 | 0.01 |
| 0.7 | 0.9 | 0.015 |
| 0.9 | 1.5 | 0.025 |
| Note: Tolerances apply to rolled and mill hardened strip. |
New information plz contact to info&cuberyllium.com.
Product Photo:
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06) XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation, Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the amount is different.
Product Tags:
|
|
Qbe1.9Ti Thin Beryllium Copper Sheet Foil Strips Polished For Spring Connectors Images
|
